Firechainsaw boots
• NFPA & CSA Standard
• EN ISO 20345
& EN 17249
Firefighter boots
Chainsaw boots
Mining boots
Industrial safety boots
Electric / dielectric boots
Winter boots
Military boots
Other range of products
• PVC
• Rubber
| Type of construction | Half Knee height, full black rubber boot was constructed to meet the armed forces requirement. It is a tough boot with reinforced mid interlining, inner polyester lining and cushion insole and leg for comfort. It has an eight eyelets flap for good leg fitting, light weight boot and a non-slip hiker sole for rough terrain and jungle warfare activities.
Vulcanized Rubber Upper and Sole
|
| Air pressure applied for water leakage testing | 50kPa |
| Lining Material | Leg Lining : Polyester Brown Weight (min) 180g/m ² , Thickness (min) 0.60mm Insole Lining : Woven Sheeting Weight (min) 140g/m ² , Thickness (min) 0.30mm Leg : Canvas Woven cotton Weight (min) 250g/m ² , Thickness (min) 0.60mm |
| Rubber Components | Upper : Black in Colour, 70% Natural Rubber & 30% Styrene Butadiene Rubber |
| Thickness of Upper and Fabric Combined | 4.1mm (± 2) |
| Sole / Heel | Black in Colour, 100% Natural Rubber |
| Chemical Resistant | Upper - Resistant towards mild acids and alkaline Sole - Resistant towards mild acids |
| Finishing | Hypalon Lacquer |
| Packing | Polybag 6 pair / carton |
*Specifications of the product are subject to changes without prior notice for further enhancements.
.
Copyright © 2000-2007 Harvik Rubber Industries Sdn Bhd. All rights reserved.