Type of construction

Vulcanized Rubber Upper and Sole.

Compliance

European Standard, CE Approved – EN 345-2:1996
CSA –Canadian Standards Association – Z195-02
ASTM – American Society of Testing Materials – F2413-05

Air pressure applied for water leakage testing

50 kPa

Lining Material

Leg Lining : Woven Cotton Canvas
                       Weight (min.) 250g/m ²
                       Thickness (min.) 0.60mm

Insole Lining : Woven Sheeting
                           Weight (min.) 140g/m ²
                           Thickness (min.) 0.30mm

Rubber Components

Leg : Black in colour, 70% Natural Rubber & 30% Styrene Butadiene           Rubber.

Front Reinforcement : Lemon yellow in colour, 70% Natural Rubber &
                                        30% Styrene Butadiene Rubber

Thickness of Upper and Fabric Combined

1.60mm (Minimum)

Sole / Heel

Black in colour, 100% Nitrile Butadiene Rubber
Oil Resistant - Immersion in iso-octane (22 hours at 22 ºC) 12% max
                           change in volume.
Abrasion Resistant - DIN 53516 : 220mm ³ max.
Hardness Shore A : 70 ± 5.

Steel Midsole

One piece Stainless Steel, meets CSA-Z195-02 Sole Penetration and EN 345 Flexing test.

Steel Toe

Meets EN 345 Impact and Compression.

Chemical Resistant

Upper – Resistant towards mild acids and alkali.
Sole – Resistant towards mild acids.

Finishing

Hypalon Lacquer.

Packing

Polybag 6 pairs / carton.