Colour	Yellow / Black
Size range	Euro: 37 – 48 UK : 4 – 14½ US : 5 – 15½
Type of construction	Vulcanized Rubber Upper and Sole
Last/ Sole Pattern	PSV/NJV
Recommendation	Structural fire fighting Firefighting involves chemical hazards (exposure) General fire rescue Bush fire fighting
Compliance	European Standard CE Approved – EN 15090: 2012 (F3/F2I HI3 P CI SRA) EN ISO 20345: 2011 (SB P E CI HI HRO SRA) EN 50321-1:2018 Class 0 (for installation with nominal voltage up to 1000V A.C. and 1500 D.C.) EN 13832-3: 2006 (Protection Against Chemicals – 200J Q-O-R) Australia New Zealand Standard Approved- AS/NZS 4821: 2014 (P HI2 CI SRC) F3/F2I = Type 3/ Type 2 footwear for firefighters suitable for fire rescue, fire suppression, property conservation & etc. with electrical insulating SB = Standard Basic Protection as per EN ISO 20345 HI3 = Heat Insulation Level 3 (under EN 15090:2012) HI2 = Heat Insulation Level 2 (under AS/ NZS 4821:2014) CI = Cold Insulation SRA = Slip Resistance on ceramic tile with Sodium Lauryl Sulphate SRC = SRA + Slip Resistance on steel surface with glycerine FO = Fuel Oil Resistant Outsole E = Heel Energy Absorption P = Nail Penetration Resistance HRO = Resistant to hot contact Q = Protection against Isopropanol (solvent) O = Protection against Ammonia solution, 25% (alkali) R = Protection against Sodium hypochlorite, 13% of active chlorine (acid) CSA Z195-14 / ASTM F2413-18 Grade 1 Toe protection Compression resistance, 11kN Penetration resistance 18 kV Electric Shock Resistance (ESR) protection
Lining Material	Extra comfort with woven cotton canvas
Upper construction	Flame retardant upper with hear insulation Waterproof Reinforced rubber High visibility with black and yellow contrast
Sole / Heel	Flame retardant rubber outsole Fuel oil resistant sole suitable for inimical environment Slip resistant vulcanized rubber outsole Excellent abrasion resistant for extra durability Heel energy absorption design to minimize heel impact Catered to enter high temperature Cold insulation sole construction
Steel Toe Cap	Epoxy coated toe caps Meets EN ISO 20345 impact and compression tests Metal toe cap provides reliable protection in cold and hot environment
Steel Midsole	Non-corrosive stainless steel Withstands pin & sharp objects
Chemical Resistance	Sole and Upper – Good resistant towards acids and alkali Upper – performance level 5 as per EN 13832-3:2006 (Q-O-R) Sole – Performance level 5, 4 and 5 as per EN 13832-3:2006 (Q-O-R)
Finishing	Lacquer coating for weather protection
Packing	Recyclable Polybag & 6 pairs in a carton

*Specifications of the product are subject to changes without prior notice for further enhancements.